Swastik Synergy Engineering

http://swastiksynergy.com/CO2-Fire-Extinguishing-System.html

Carbon Dioxide Gas :

Under normal atmospheric temperature and pressures, carbon dioxide exists as a colorless, odorless gas which is about 1.5 times heavier than air. Carbon dioxide will not burn or support combustion and will not sustain life. When confined within a suitable pressure vessel and depending on temperature and pressure conditions, carbon dioxide can exist in any of three stages of matter; solid, liquid and gas.

High Pressure Carbon Dioxide System :

High pressure CO2 fire extinguishing system designed to maintain the carbon dioxide supply at 21º C and 850 psig in strength alloy steel cylinders. The cylinders contain the CO2 required to protect the largest single hazard. On large hazards where several cylinders are required, a manifold is used to connect each cylinder by means of flexible hoses and check valves. Cylinder valves control the CO2 flow to the hazard through properly sized pipe, terminating in nozzles that apply the CO2. Flow rate is controlled by nozzle orifices as well as pipe sizes. The cylinder master valves are electronically operated and the slave valves are pressure actuated. The master valves can be automatically and/or manually operated.

Novec Fire Suppression System

Novec Fire Suppression System

Swastik synergy is expertise in SITC of NOVEC Fire Suppression system. The extinguisher via its cooling effect. And as it is liquid at room temperature it makes handling, shipping & system maintenance much easier that its Halon predecessor.

Novec has zero ozone depletion potential & an tremendously low global warming potential in that it has an atmospheric lifetime.It can be used for both streaming & flooding applications & has been designed for individual hazards fire protection.

At Synergy we also undertake complete SITC of NOVEC 1230 Fire Extinguishing system. Novec has a very low use concentration in that the amount required for effective suppression is around 5.3%-5.6% of the volume of the target area to be protected.

This means our Novec systems have one of the smallest system storage footprints of any of our fire suppression systems.

Tube Based Fire Suppression System

http://swastiksynergy.com/Firessense.html

Major Causes of Fire :

Unattended small short circuits are the main cause of most Major Fires. Fire in Server Racks or electrical

panels are generally caused by short circuit or small sparks but as they are not attended they lead to

serious hazard to life and property leading to personnel injuries, property damage, loss of productivity

and precious time.

Introducing Firessense a product of SWASTIK SYNERGY which is a very simple but most effective solution to fight small fires or short circuits.

Firessense consists of following components :

System Configuration

Firessense Tube for Detection.

Fire Extinguisher Cylinder with Automatic Valve Assembly.

Clean Agent Fire Fighting Gas

Pressure Switch.

Audio Alarm.

Control Panel.

Kitchen Fire Suppression System

Fire Suppression Systems rapidly vaporizes to gas during discharge and evaporates cleanly, leaving no residue behind, which means no costly cleanup.

5. It is Earth Friendly

Clean Agents are non-ozone depleting and have a short atmospheric lifetime side effects.

There are two methods for applying an extinguishing agent: total flooding and local application:

1. Systems working on a total flooding principle apply an CO2 Fire Extinguishing System to a three dimensional enclosed space in order to achieve a concentration of the agent, volume percent of the agent in air, adequate to extinguish the fire. These types of systems may be operated automatically by detection and related controls or manually by the operation of a system actuator.

2. Systems working on a local application principle apply an extinguishing agent directly onto a fire, usually a two dimensional area, or into the three dimensional region immediately surrounding the substance or object on fire. The main difference in local application from total flooding design is the absence of physical barriers enclosing the fire space.

For speed in suppressing fires, reducing damages, saving on floor space and allowing visibility the Kitchen Fire Suppression System is a clear choice, which includes the use of HFC-227ea and FM-200, leaves no residue and doesn’t require costly clean-up, unlike sprinklers and other fire protection systems. Clean Agent Fire Protection System discharges in 10 seconds or less, extinguishing a fire quickly and effectively.

There are 3 ways Clean Agent Fire Suppression System can extinguish a fire :

1. Reduction of heat

2. Reduction or isolation of oxygen

3. Inhibiting the chain reaction of the above components

Clean Agent Fire Suppression System Benefits :

1. It is Fast

Fire Suppression Systems reach extinguishing levels in 10 seconds or less.

2. It is a Effective way

Clean Agents Fire Suppression System is designed to control and extinguish a fire in its incipient stage, for example, before it has a chance to spread. Clean Agents are electrically non-conductive and non-corrosive as well as there will be no damage to electronics and delicate mechanical devices.

3. It is also Safe

Clean Agent Fire Suppression Systems is designed to provide a wide margin of human safety as they are safe to use where people are present.

4. It is a Clean method

Clean Agent Fire Suppression System

http://swastiksynergy.com/Clean-Agent-System.html

Gaseous fire suppression is a term to describe the use of inert gases and chemical agents to extinguish a fire which is also known as Clean Agent Fire Suppression System. The system typically consists of the agent, agent storage containers, agent release valves, fire detectors as well as the fire detection system, wiring control panel and actuation signaling, agent delivery piping, and agent dispersion nozzles. Less typically it is that the agent may be delivered by means of solid propellant or may be gas generators that produce either inert or chemically active gas.

The term “Clean Agent” is defined as an electrically nonconductive, volatile, or gaseous fire extinguishing that does not leave a residue upon evaporation according to NFPA 2001 It is said that using water to extinguish a fire is not always the ideal choice for everyone as when we are trying to protect critical assets then using water will just compound and add to the damage. Using a Co2 Fire Extinguishing System in this case is the best solution.

There are 3 ways Clean Agent Fire Suppression System can extinguish a fire:

1. Reduction of heat

2. Reduction or isolation of oxygen

3. Inhibiting the chain reaction of the above components

Clean Agent Fire Suppression System Benefits:

1. It is Fast

Fire Suppression Systems reach extinguishing levels in 10 seconds or less.

2. It is a Effective way

3. It is also Safe

Clean Agent Fire Suppression Systems is designed to provide a wide margin of human safety as they are safe to use where people are present.

4. It is a Clean method

Fire Suppression Systems rapidly vaporizes to gas during discharge and evaporates cleanly, leaving no residue behind, which means no costly cleanup.

5. It is Earth Friendly

Clean Agents are non-ozone depleting and have a short atmospheric lifetime side effects.

There are two methods for applying an extinguishing agent total flooding and local application:

1. Systems working on a total flooding principle apply an extinguishing agent to a three dimensional enclosed space in order to achieve a concentration of the agent, volume percent of the agent in air, adequate to extinguish the fire. These types of systems may be operated automatically by detection and related controls or manually by the operation of a system actuator.

For speed in suppressing fires, reducing damages, saving on floor space and allowing visibility the Kitchen Fire Protection System is a clear choice, which includes the use of HFC-227ea and FM-200, leaves no residue and doesn’t require costly clean-up, unlike sprinklers and other fire protection systems. Clean Agent Fire Protection System discharges in 10 seconds or less, extinguishing a fire quickly and effectively.